Product
Measurement
Measurement Horizontal
Measurement Shade
Measurement Shade

IINSIDE MOUNT INSTALLATION:

To find width: Measure exact distance to the nearest 1/8" between inside surfaces of window frame at the top, middle and bottom, and use the narrowest width. Do not make any width deductions.

To find length: Measure exact distance from inside surface at top of window to sill. If you prefer blind not to touch sill, deduct 1/4". If there is no sill, measure length to point where shade is to reach. IMPORTANT: Deduct 1/8" for best results.
   

OUTSIDE MOUNT INSTALLATION:

To find width: Measure exact distance to the nearest 1/8" between the outermost points where the blind is to be placed. For optimum light control, this measurement should extend 3/4" beyond the window opening on each side (or 1-1/2" for the entire width). IMPORTANT: This measurement should overlap each side of the window frame by at least 1-1/2".

Malaysia ramin timber wooden blind slat, timber wooden blind, wooden blind slat or wooden slat Manufacturer
Copyright © 2004, Carpenwise Sdn Bhd. All rights reserved.