Measurement Shade
 
INSIDE MOUNT INSTALLATION:


To find width:
Measure exact distance to the nearest 1/8" between inside surfaces of window frame at the top, middle and bottom, and use the narrowest width. Do not make any width deductions.

To find length:
Measure exact distance from inside surface at top of window to sill. If you prefer blind not to touch sill, deduct 1/4". If there is no sill, measure length to point where shade is to reach. IMPORTANT: Deduct 1/8" for best results.

 

       
 
OUTSIDE MOUNT INSTALLATION:
To find width:
Measure exact distance to the nearest 1/8" between the outermost points where the blind is to be placed. For optimum light control, this measurement should extend 3/4" beyond the window opening on each side (or 1-1/2" for the entire width). IMPORTANT: This measurement should overlap each side of the window frame by at least 1-1/2".

 

       
 


Copyright © 2008, Carpenwise Sdn Bhd. All rights reserved.
Web Design By NetBusiness Solution